This thesis aims to investigate the positioning concept of industrial services. We chose to identify the reasons why positioning is used as well as to describe the positioning process. The research strategy chosen for this thesis was a case study of a consultancy firm Benima AB. This firm was chosen due to the fact that a new positioning concept during the latest year hade been implemented and therefore seemed like a good choice for our study. Of the six available theoretical reasons for positioning, we found that Benima AB had two of them: namely change in target market or their needs and demands and renewed company identity/personality.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

The 1st of January this year the state owned Swedish Luftfartsverket changed their name into the shorter name LFV. The shorter LFV is a more modern version in terms of that the name is a proof of that the classic organisation of the state, Luftfartsverket, with this stepbreaks through boarders and finds new ways. Plans have existed before but since 2005 when Luftfartsverket lost its assignments from the government and become a state owned business corporation, the plans have intensified. Now, also for all the employees, it isgetting obvious that something is going on in the organisation.The purpose of this paper is to see how this newly made change of name and logotype have been recieved and how it has effect the strategic choosen respondents within the organisation LFV. These choosen respondents have thorough knowledge of the organisation of LFV.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

In this paper we have chosen to work with both the background to the Library Act § 7a and followed the process of creating the library plan of Helsingborg City Library. We have tried to follow the process through the public text documents that are available. We start by giving a background to the library act and its additional § 7a. Then we give a recap of the emergence of the modern public libraries in Sweden during the last century until today. When the working group at the City Library in Helsingborg was working with the library plan, they had to take in count the strategic goals set up by Region Skåne, since Helsingborg is place in that area.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a Two-step process which bypassed the problem above.

Uncertainty is a well-known phenomenon that is recurring in biographies, imaginative literature and science, but is less studied in nursing science. The aim of this participatory action research project was to, in collaboration with nursing students; explore nursing activities for relieving patients? uncertainty. A qualitative approach was chosen with focus groups and the text was content analyzed. The students studied their third semester on a nursing program.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

The Pedagogical progression within MSI ? Based upon The Bologna Process and UPC.In a near future several of the European countries will begin working after new guidelines concerning a declaration called the Bologna process. Everything will be done one step at a time and the declaration will change the way the students are being graded, all this for the sake of making the European labour-market moreopened for all of its millions of students.In Växjö this process is in the making, but to adapt to the future demands the school must also change its ways of teaching.To increase its quality the University has put together a procedure of actions to improve the pedagogical working method in all its institutions. In this essay we would like to elucidate how the work with the Bologna process is proceeding within the institution of Mathematics and System Engineering and whatthey do improve their pedagogical teaching. By doing a qualitative case study on the student at the Computer Science Program we wish to find the answers to our questions..

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

As my final project I planned to animate a movie. Usually I work with illustration and I see animation as the next step in my design work, to investigate how illustration and movement can collaborate. The purpose with my project was to develop my technical skills, improve my design process and broaden my work to eventually be able to work with animation. My ambition was to make an abstract animation and my focus was mainly on my personal process and knowledge. I also wanted to explore how much one can abstract a movie while still communicating a story or message..